Flap disc zirkon ø115mm, grit 100
Flap disc zirkon ø115mm, grit 100
Flap disc zirkon ø115mm, grit 100
Flap disc zirkon ø115mm, grit 100
Flap disc zirkon ø115mm, grit 100
Flap disc zirkon ø115mm, grit 100
Flap disc zirkon ø115mm, grit 100
Flap disc zirkon ø115mm, grit 100
Flap disc zirkon ø115mm, grit 100
Flap disc zirkon ø115mm, grit 100
PROcut

Flap disc zirkon ø115mm, grit 100

Item code: BD100Z115
Šifra proizvođača: CSISZOLÓK
  • Purpose: For the processing of materials of high hardness
  • Abrasive sanding disc with paper lamellae
  • Lamellas are placed under a 15° angle towards the grinding surface
  • Zircon, grit 100 is used for abrasive particles
  • Flange diameter: ø22.2mm

 

  • NSZ
1
2
OK
Morate biti verifikovani korisnik kako bi ste videli cenu proizvoda
Save in the wishlist
  • Abrasive grinding disc with reinforced paper lamellas intended for processing materials with high hardness.
  • The lamellae are at an angle of 15° in relation to the grinding plane.
  • ZIRKON was used for abrasive grains.
  • Inside the plate there is a reinforcing mesh, which ensures safe and secure operation.
  • Granulation P100 diameter Fi 115.
  • To work with grinding discs, you need to use an angle grinder
  • The metal flange provides a tighter and more secure connection to the angle grinder.
  • The month and year of production are marked on the inner ring, as well as when it is recommended to use the grinding wheel.
  • There is a possibility that the grinding wheel changes its properties over time, which directly affects safety and quality, and therefore it is recommended to use it no later than 3 years from the date of manufacture.
  • The diameter of the flange is 22.2 mm.
  • Max. speed is 80 m/s.
  • Max. number of rotations is 13,300 RPM.
  • Abrasive discs can be used by professionals: Locksmiths, Mechanics, Painters, Installers, Varioci, as well as all hobbyists.
Characteristics Value
Category Grinding wheels and discs
Brand PROcut
Craft Installers, Lacquers, Locksmiths, Welders
Dimensions ø115mm
Granulation 100
Material Zirkon

Similar products

Sačuvano u omiljne
Purpose: For grinding elements made of ferrous metal For use on an angle grinder Max. ...
Sačuvano u omiljne
Purpose: For fine cutting of ceramics Max. number of rotations: 12.200 rpm The diamete...
Sačuvano u omiljne
Purpose: For fine cutting of ceramics Max. number of rotations: 13.300 rpm The diamete...
Sačuvano u omiljne
Purpose: For cutting hard materials such as granite, hard concrete and brick Max. numbe...
Sačuvano u omiljne
Purpose: For cutting hard materials such as granite, hard concrete and brick Max. numbe...
Sačuvano u omiljne
Purpose: For fast cutting of concrete, stone, brick Max. number of rotations: 8.500 rpm...
Sačuvano u omiljne
Purpose: For fast cutting of concrete, stone, brick Max. number of rotations: 12.200 rp...
Sačuvano u omiljne
Purpose: For removing paint, rust and dirt from larger flat surfaces Made of reinforced...
Sačuvano u omiljne
Purpose: For cutting of construction steel For use on an angle grinder Dimensions:&nbs...
Sačuvano u omiljne
Purpose: For cutting of stone For use on an angle grinder Dimensions: ø115...
Sačuvano u omiljne
Purpose: For cutting of construction steel For use on an angle grinder Dimensions:&nbs...